|
These guidelines are to help you make an
accurate measurement.
Measure the frame outside on both
the height and
width. Always measure the exact brickwork opening and not the
old door frame.
Measure brick to brick in at least three
different places and deduct 10mm from both the final height and
width measurements.
The width should be measured at three points
- top, middle and bottom of the opening. The smallest of these
measurements is taken as the width. Always deduct 10mm from the final
width.
|
 |
|
The height should be measured at three points
- left, middle and right of the opening. The smallest of these
measurements is taken as the height. Always deduct 10mm from the final
height.
|
Minimum Size: 800mm Width x 1950mm Height
Maximum Size: 1000mm Width x
2200mm Height
If your door exceeds these
measurements we can provide a Side Panel &/or Top Lite, please enquire for
prices.
Please note: We are
unable to accept responsibility for incorrect measurements. If you are unsure
we recommend that you consult a local joiner/builder to measure your door or
why not give us a call on 0800 0776797 and we will gladly help.
|
