Korniche {{serverconnect1.data.doordetails[0].Name}}

All frames are made to measure.

• Sizes stated should be the overall frame size including any cill and frame extensions (if required).
• All dimensions to be supplied in Metric.
• All frame styles are viewed from outside.
• We do not make any fitting allowances on the sizes you provide. The size you state will be the size we manufacture.

Threshold & Cill

Rebated integrated cill as standard, saving even more time on site as no separate cill needs to be installed. This threshold combines a 150mm cill with the standard threshold, reducing the overall step to 52mm.

Frame Extensions/Add On's

A frame extender allows you to increase the thickness of the frame. Useful for properties with deep plaster, render or tiles. 38mm extensions are available.

Remember, if you require any extensions, these need to be included in the overall dimensions.

Argon Filled Sealed Units – Unbeatable Thermal Efficiency

The argon upgrade will improve even further the U-value on the door by at least 0.2W/m2K. Selecting the thermal option on the glass will upgrade the glass to have a warm edge spacer bar, low E glass and double glazed sealed units filled with argon gas.

Laminated Glass

The laminated glass consists of two pieces of glass, one 6.4mm thick containing a sandwich of plastic interlayer. Offering additional protection as the glass cannot be broken into. It's the same glass found in car windscreens and shop fronts.

Internal Georgian Bars

We offer an array of decorative Georgian Bar designs. The internal bars are fitted within the sealed unit and 18mm thick as standard, available in our extensive range of colours to match the profile colour.

Square Lead

We offer 9mm decorative square lead on the external pane of glass.

Diamond Lead

We offer 9mm decorative diamond lead on the external pane of glass.

Trickle Ventilation

Trickle vents allow you to control ventilation and air circulation, helping to reduce condensation and mould. They provide you with a small amount of fresh air into the building without letting a lot of heat escape.

If the current windows and doors have trickle vents fitted, then the new replacements must also be fitted with trickle vents.

All new build properties and extensions are required to have adequate background ventilation whether this is by trickle vents, purge ventilation or extraction.

Fixing Screws & Packers

The installation pack includes a selection of universal frame and glazing packers, large 120mm self tapping frame screws (no rawl plugs required) and self tapping cill screws. Fixing screws for extension pieces will also be supplied if required.